Fantasy baseball is the oldest fantasy sport, and it is also the longest: a season runs for six months, with games almost every day, and the format you play decides whether that marathon feels like a sprint or a grind. The players are the same, the stats are the same, but rotisserie, head-to-head and keeper leagues are three different games built on the same numbers. The format decides how you draft, how you manage the wire, and what winning looks like.
This guide explains the three formats, the standard scoring categories, and how each one changes the way you should build a team.
Key Takeaways
- Fantasy baseball’s standard scoring is 5×5: five hitting categories (runs, home runs, RBI, stolen bases, batting average) and five pitching categories (wins, saves, ERA, strikeouts, WHIP).
- Rotisserie (roto) ranks every team in each category across the whole season — no weekly matchups, no playoffs, highest total wins.
- Head-to-head (H2H) plays a different opponent each week, winning or losing each category separately, with a playoff bracket at the end.
- Keeper leagues let you protect an agreed number of players from one season to the next, so the draft is about the future as well as the present.
- The daily schedule is the game’s defining feature: with games nearly every day, streaming pitchers and working the waiver wire matter far more than in fantasy football.
The standard 5×5 categories
Most fantasy baseball leagues use the same ten categories, five for hitters and five for pitchers. The format is called 5×5, and it has been the standard since the game began.
| Hitting | What counts | Pitching | What counts |
|---|---|---|---|
| R | Runs scored | W | Wins |
| HR | Home runs | SV | Saves |
| RBI | Runs batted in | K | Strikeouts |
| SB | Stolen bases | ERA | Earned run average (lower is better) |
| AVG | Batting average | WHIP | Walks plus hits per inning pitched (lower is better) |
Eight of the ten categories reward bigger numbers. Two do not: ERA and WHIP are ratio stats where lower is better, and they are the ones new managers misunderstand most. A pitcher who throws 200 innings with a 4.50 ERA hurts your ratios far more than a pitcher who throws 60 innings with a 2.50 ERA helps them, because ratios are weighted by volume. The same logic applies to batting average: a hitter who bats .300 in 600 at-bats moves your team average far more than one who bats .300 in 100 at-bats.
Rotisserie: the season-long grind
Rotisserie, or roto, is the original fantasy format, and it is still the favorite of the most serious baseball leagues. Every team accumulates stats across the entire season, and at any point each team is ranked first to last in every category. In a 12-team league, the team with the most home runs gets 12 points, second gets 11, third gets 10, and so on down the line. Your total score is the sum of your ranking points across all ten categories. In a 12-team league with 10 categories, the maximum score is 120. The team with the highest total at the end of the season wins.
There are no weekly matchups and no playoffs. That changes everything about how you manage. A bad week does not exist in roto — only a bad month, and even that can be recovered, because the standings are a season-long accumulation. But there is also no way to hide a weakness: a team that is last in stolen bases is last in stolen bases all season, and every point it leaves on the table in that column is a point it must make up somewhere else. Roto rewards balance above all.
Head-to-head: weekly battles
Head-to-head (H2H) takes the same categories and turns them into weekly matchups, much like fantasy football. Each week you face one opponent, and you win, lose or tie each category based on that week’s totals. Win six categories and lose four, and your record for the week is 6-4. At the end of the regular season — usually 20 to 22 weeks of matchups — the top teams go into a playoff bracket to decide the champion.
H2H changes the strategy in three ways. First, it rewards weekly management over season-long balance: you can stream a starting pitcher for a single start, add a stolen-base specialist for a weekend, or sit a pitcher with a bad matchup to protect your ERA. Second, it makes a punted category viable in a way roto never does — if you lose stolen bases 0-1 every week, you only lose one category a week, and you can win the other nine. Third, it makes the playoffs a separate season: a team that finishes fourth can win the championship, and a team that dominated the regular season can lose in the first round because its pitchers had one bad week.
Keeper leagues: the draft never really ends
A keeper league is not a scoring format — it is a roster rule that can sit on top of roto or head-to-head. In a redraft league, every team starts fresh each year with a new draft. In a keeper league, each team protects an agreed number of players from one season to the next — commonly three to five — and the draft fills in the rest.
Keepers change the value of every player. A young player who will be great in two years is worth drafting in a keeper league even if he does little this season, because you will own him when he breaks out. A veteran having a career year is worth less than he looks, because you cannot keep him forever and his trade value is measured in the future picks he can bring back. The draft becomes a two-year exercise: you are drafting for this season and for the keepers you will carry into the next one.
The rules matter enormously, and they vary. Some leagues let you keep a player at the round you drafted him in, which makes a late-round breakout the most valuable asset in the game. Some charge a round penalty, moving the keeper up a round each year he is kept. Before you join a keeper league, read the keeper rules as carefully as the scoring rules — they decide what a draft pick is worth.
Keeper leagues are also the format where trading matters most. A team out of contention can trade its veterans to a contender for young players and draft picks, rebuilding for next year while the contender pushes for a title. That is a normal and healthy part of keeper play, and it is why keeper leagues argue about trades more than any other format.
Draft strategy by format
In roto, draft for balance. Your goal is to finish in the top half of every category, not first in three and last in three. From the middle rounds on, draft for the categories you are short in. Pay special attention to stolen bases and saves, the two scarcest categories: there are only so many players who steal 30 bases or close games, and once they are gone, you cannot buy them back. And watch your ratios: a rotation full of high-strikeout, high-ERA pitchers will win strikeouts and lose ERA and WHIP, which is a net loss.
In head-to-head, draft for weekly wins. You can afford a hole — punt saves if you want to load up on starters, or punt batting average if you want power — because a hole only costs you one category a week. Draft players with multi-position eligibility, because they give you lineup flexibility when injuries hit. And think about the playoffs: a player with a soft September schedule is worth more than his season numbers suggest.
In keeper leagues, draft age and upside. A 23-year-old with a rising role is worth more than a 33-year-old with the same numbers, because you will own the younger player for years. In the late rounds, take the prospect over the veteran — the veteran’s ceiling is known, and the prospect’s is not.
In every format, respect the daily grind. Baseball plays nearly every day, and that is what makes the wire so powerful. A starting pitcher can be streamed for a single start, a hitter can be added for a weekend series against weak pitching, and a closer can emerge from nowhere when the incumbent gets hurt. Set your lineup every day, or at least every few days — a fantasy baseball team left untouched for a week is a team losing ground.
Managing the season
The habits that win fantasy baseball are unglamorous: check the schedule, work the wire, and do not panic. Stream pitchers for strikeouts and wins, not for volume, and sit a pitcher when the matchup is bad — every start is a chance to damage your ERA and WHIP. Watch the closer carousel: saves are the scarcest pitching category, and the job changes hands constantly, so the manager who adds the new closer first gets the saves. And do not chase the hot week: a hitter who goes 8-for-12 in a weekend is not an 8-for-12 hitter. Look at playing time, lineup spot and the underlying numbers before you add anyone, and do not drop a proven player after a bad week — in a six-month season, a bad week is noise.
Fantasy baseball FAQ
What is 5×5 scoring?
Five hitting categories (runs, home runs, RBI, stolen bases, batting average) and five pitching categories (wins, saves, ERA, strikeouts, WHIP). It is the standard fantasy baseball setup.
What is the difference between roto and head-to-head?
Roto ranks every team in each category across the whole season — no weekly matchups, no playoffs, highest total wins. Head-to-head plays a different opponent each week, winning or losing each category separately, with a playoff bracket at the end.
What is a keeper league?
A league where each team protects an agreed number of players from one season to the next, instead of redrafting the whole roster. Keepers can sit on top of roto or head-to-head scoring.
Which categories are the scarcest?
Stolen bases and saves. Only a limited number of players steal 30 bases or close games, so those players go earlier in drafts than their overall numbers alone would suggest.
Should a beginner start with roto or head-to-head?
Head-to-head is friendlier: weekly matchups, a playoff to aim for, and a bad week that does not ruin the season. Roto is the deeper game and the one most long-running leagues use.
How often should I set my lineup?
Every day, or as close to it as you can. Baseball plays nearly every day, and a team left untouched for a week falls behind on games played, streaming starts and waiver pickups.
Related reading
More from our Fantasy hub (/fantasy/): how fantasy football scoring works (/how-fantasy-football-scoring-works/), how the waiver wire works (/fantasy-football-waiver-wire-explained/) and how to make start-or-sit decisions (/fantasy-start-or-sit-decisions/).
Corrections: if you spot an error in this guide, tell us through our Corrections Policy (/corrections-policy/) page and we will check it against official sources.